Model
|
PL55HLH |
| Resin to be used |
HSPE / LDPE / LLDPE |
| Screw diameter (mm) |
Ø55 |
| Screw length (L/D) |
32/1 |
| Screw & barrel material |
SACM-1 Nitrided and honing finished,Haroness
barrel 75o screw or 70o or
over |
| Gear material |
SCM-1 Width High Freqency treatment |
| Heater capaity (kw) |
30 kw |
| Mail motor (inverter HP) |
40 HP |
| Barrel cooling system |
Air Cooling system |
| Max extrusion output / hr |
100 kg |
Die
HDPE (mm)
LDPE / LLDPE (mm) |
Ø100 |
| Thickness (mm) & width of tube (mm)
max |
0.01-0.06 mm
1000 mm (max) |
| Control panel |
complete set with operation switch
A-meter,magnetic switch power relay |
| Auto. Temperature controller |
6 Points |
| Take-up motor |
2 HP D.C. |
| Take-up speed (m/min) |
0-120 M |
| Pinch roll width (mm) |
1200 mm |
| Winder |
Surface friction type |
| Winder motor |
2 hp |
| Air cooling ring |
1 set |
| Water coolomg ring |
|
| Air blower |
7 1/2HP |
| Machine height |
6500 mm |
