Model
|
PL45HLD |
| Resin to be used |
P.P. |
| Screw diameter (mm) |
Ø55 |
| Screw length (L/D) |
28/1 |
| Screw & barrel material |
SACM-1 Nitrided and honing finished,Haroness
barrel 75o screw or 70o or
over |
| Gear material |
SCM-1 Width High Freqency treatment |
| Heater capaity (kw) |
16 kw |
| Mail motor (inverter HP) |
20 HP |
| Barrel cooling system |
Air Cooling system |
| Max extrusion output / hr |
45 kg |
Die
HDPE (mm)
LDPE / LLDPE (mm) |
Ø250 (P.P.) |
| Thickness (mm) & width of tube (mm)
max |
0.02-0.06 mm
150-550 mm (max) |
| Control panel |
complete set with operation switch
A-meter,magnetic switch power relay |
| Auto. Temperature controller |
|
| Take-up motor |
2 HP D.C. |
| Take-up speed (m/min) |
|
| Pinch roll width (mm) |
750mm |
| Winder |
Center drive winder |
| Winder motor |
0.32 kgm x 2 sets |
| Air cooling ring |
1 set |
| Water coolomg ring |
10 sets |
| Air blower |
1 HP |
| Machine height |
3900 mm |
