• MODEL:

• FP-CD100

  FP-CD120

• FEATURES:

• 1. This multiple-purpose mono-layer casting film is designed to produce many use of film. Such as disposable glove (household use, sanitary use). Table cloth, apron, shower cap, rain shoes protector, and rain coat.

  2. This equipment can manufacture thin as well as thick films and can produce variable film types for a truly impressive range of application. Material is extruded from "COATHANGER" die and hauled through a series of rolls into a piece of casting film.

SPECIFICATION

* Servo Drive For Optional.

Model	FP-CD100	FP-CD120
Resin to Be Used	LLDPE/LDPE/EVA Embossing Film
Width of Film (mm)	1200	2000
Thickness of Film (mm)	0.03-0.25	0.03-0.25
Max Extrusion Output (kg/hr)	120-180	180-240
Installed Power	166 kw	210 kw
Estimated Running Consumption	116 kw	150 kw
EXTRUDER
Type	Non-Vented Type High Basement Extruder
Screw Diameter (mm)	Ø100	Ø120
Screw Length (l/d)	30/1	30/1
Screw Speed	0-100 r.p.m.	0-100 r.p.m.
Screw Material	SCM-440 Alloy Steel With Nitride, Hard Chromed Treatments
Barrel Material	SACM-645 Alloy Steel With Polished Nitride.
Heating Capacity	35.2 kw	54 kw
Auto Temperature Control	5	6
Barrel Cooling	1/8 HP x 5	1/8 HP x 6
Main Motor-AC Motor	100 HP	1250 HP
Screen Changer
Type	Hydraulic Operating System, Sliding Plate Type
Hydraulic Pack	3 hp	5 hp
T-Die
Die width	1300 m/m	2150 m/m
Die lip	0.8 m/m	0.8 m/m
Auto Temperature Control	7	9
Heater Capacity	28 kw	41.8 kw
Roll Stack
Type	3 Rollers In Horizontal Position
Chill Roller	Ø300m/mx1500 m/mx1	Ø350 m/mx2500 m/mx1
Silicon Roller	Ø200m/mx1500 m/mx1	Ø300 m/mx2500 m/mx1
Embossing Roller	Ø450m/mx1500 m/mx1	Ø450 m/mx2500 m/mx1
Take-up Roller	Ø160m/mx1500 m/mx2	Ø200 m/mx2500 m/mx2
Expansion Roller	Ø150m/mx1500 m/m	Ø125 m/mx2500 m/m
Tension Controller	Japan Made TC40 x 1 set
Slitting & Edge Trimming Device	In-Line operation system
Tension Winder
Type	Turret Tumbling Tension Controlled Winder, Film Cut-Off By Hot Wire at Pre-set Target Film Length And Reel-Change Automatically.
Driving Motor (winding)	2 Hp Ac With 1/20 Reducer x 2 Sets	3 Hp Ac With 1/20 Reducer x 2 Sets
Speed (M/min)	0-60 M/min	0-60 M/min
Edge Scrap Recycling Unit
Type & Operation Method	Spooled Winder Unit x 2 Sets Trimmed Scarp Being Compressed, Crushed And Into Extruder By 3 Hp Centrifugal Blower For Reclamation.
Water Chiller
Power	3.5 kw x 2	5 kw x 2
Pipe Size	1 1/2"	1 1/2"
Btu	119400 (10rt)	176925 (15rt)
Control Pane	Lsolated Type With Complete Instrumentation And Wiring.
Optional Items	1 Hp Auto Loader,3 Hp Air Compressor
MAchine Dimensions (L x W x H) (cm)	600 x 635 x 330 (For Reference)	850 x 900 x 330 (For Reference)