| Film Blowing Lines Series | |
| PE Film Blowing Machine | |
- MODEL:
PL 45HLD - FEATURES:
1. Special design of the screw for higher capacity.
2. Complete construction for stable operation and maintenance .
3. With adjustable take up tower and pneumatic pinch roller device.
4. Loadcell converter as operational equipment for automatic width & thickness control as operational equipment for automatic width & thickness control and adjustment, easy operation and save time.
5.Other optional equipment:
» Air compressor
» Film surface treater (Corona)
» Auto resin loader
» Embossing roller
» Rotary die
» Film width controller
» PLC temperature controller(computerized)
» Back to back rewinder
SPECIFICATION
* Servo Drive For Optional.
| Model | PL45HLD |
| Resin To Be Used | HSPE / LDPE / LLDPE |
| Screw Diameter (mm) | Ø45 |
| Screw Length (l/d) | 28/1 |
| Screw & Barrel Material | SACM-1 Nitrided And Honing Finished, Hardness Barrel 75o Screw Or 70o Or Over |
| Gear Material | SCM-1 Width High Frequency treatment |
| Heater Capacity (kw) | 12 kw |
| Mail Motor (Inverter Hp) | 20 hp |
| Barrel Cooling System | Air Cooling System |
| Max Extrusion Output / Hr | 35 kg |
| Die HDPE (mm) LDPE / LLDPE (mm) |
Ø60 |
| Thickness (mm) & Width Of Tube (mm) Max | 0.01-0.06 mm 550 mm (max) |
| Control Panel | complete Set With Operation Switch A-meter, Magnetic Switch Power Relay |
| Auto. Temperature Controller | 5 Points |
| Take-Up Motor | 1 hp d.c. |
| Take-Up Speed (m/min) | 0-130 M |
| Pinch Roll Width (mm) | 610 mm |
| Winder | Single Wheel Winder Type |
| Winder Motor | 0.3 kgm |
| Air Cooling Ring | 1 set |
| Water Cooling Ring | |
| Air Blower | 5 hp |
| Machine Height | 4800 mm |
» 