• MODEL:

• PL32SWPFA	PL42SWPFA
  PL32SWPFA-V	PL42SWPFA -V

• FEATURES:

• The soft loop handle and poly draw handle drive.

• 1. At loop handle film unwinder, the film was cut into narrow strip film, then top fold to loop handle before seal it.

• 2. The poly draw film was pre-slit to narrow strip film by slitting machine, by passing through the inserting device, it is formed inside the bags.

• Photo-cell control & pre-warming station.

• 1. this series of machine uses Erwin Sick Photocell for precise control of print image to the side weld.

• 2. Additional stabilization of the side weld in the area of the bottom gusset and top gusset by the pre-sealing station for four layers film.

• The patch handle device.

• 1. The reel of patch handle film is fed and cut by hot cutting knife, then attached automatically welding on top center position of handle bags.

• Handle punch.

• 1. The pneumatically controlled handle punch is equipped with knife type cutter which is designed for long life and easily changeable.

SPECIFICATION

* Servo Drive For Optional.

Model	PL32SWPFA	PL42SWPFA
Cutting Length (inch)	3"-30"	3"-30"
Cutting Width	3"-26"	3"-36"
Speed (bag/min)	20-70	20-70
Film Thickness	0.012-0.02	0.012-0.02
Tolerance	±1	±2
Power Required	6.5	7.0
N.W.(kgs)	2400	2700
G.W. (kgs)	2800	3100
Machine Dimensions (L x W x H)(cm)	850 x 180 x 180	850 x 210 x 180
Packing Dimensions (L x W x H)(cm)	230 x 340 x 190 230 x 340 x 160	230 x 350 x 190 230 x 350 x 160