- MODEL:
-
FP-CD100 FP-CD120 - FEATURES:
-
1. This multiple-purpose mono-layer casting film is designed to produce many use of film. Such as disposable glove (household use, sanitary use). table cloth, apron, shower cap, rain shoes protector, rain coat.
2. This equipment can manufacture thin as well as thick films and can produce variable film types for a truly impressive range of application. Material is extruded from "COATHANGER" die and hauled through a series of rolls into a piece of casting film.
SPECIFICATION
* Servo Drive For Optional.
| Model | FP-CD100 | FP-CD120 |
| Resin to Be Used | LLDPE/LDPE/EVA Embossing Film | |
| Width of Film (mm) | 1200 | 2000 |
| Thickness of Film (mm) | 0.03-0.25 | 0.03-0.25 |
| Max Extrusion Output (kg/hr) | 120-180 | 180-240 |
| Installed Power | 166 kw | 210 kw |
| Estimated Running Consumption | 116 kw | 150 kw |
| EXTRUDER | ||
| Type | Non-Vented Type High Basement Extruder | |
| Screw Diameter (mm) | Ø100 | Ø120 |
| Screw Length (l/d) | 30/1 | 30/1 |
| Screw Speed | 0-100 r.p.m. | 0-100 r.p.m. |
| Screw Material | SCM-440 Alloy Steel With Nitrided, Hard Chromed Treatments | |
| Barrel Material | SACM-645 Alloy Steel With Polished Nitrided | |
| Heating Capacity | 35.2 kw | 54 kw |
| Auto Temperature Control | 5 | 6 |
| Barrel Cooling | 1/8 HP x 5 | 1/8 HP x 6 |
| Main Motor-AC Motor | 100 HP | 1250 HP |
| Screen Changer | ||
| Type | Hydraulic Operating System, Sliding Plate Type | |
| Hydraulic Pack | 3 hp | 5 hp |
| T-Die | ||
| Die width | 1300 m/m | 2150 m/m |
| Die lip | 0.8 m/m | 0.8 m/m |
| Auto Temperature Control | 7 | 9 |
| Heater Capacity | 28 kw | 41.8 kw |
| Roll Stack | ||
| Type | 3 Rollers In Horizontal Position | |
| Chill Roller | Ø300m/mx1500 m/mx1 | Ø350 m/mx2500 m/mx1 |
| Silicon Roller | Ø200m/mx1500 m/mx1 | Ø300 m/mx2500 m/mx1 |
| Embossing Roller | Ø450m/mx1500 m/mx1 | Ø450 m/mx2500 m/mx1 |
| Take-up Roller | Ø160m/mx1500 m/mx2 | Ø200 m/mx2500 m/mx2 |
| Expansion Roller | Ø150m/mx1500 m/m | Ø125 m/mx2500 m/m |
| Tension Controller | Japan Made TC40 x 1 set | |
| Slitting & Edge Triming Device | In-Line operation system | |
| Tension Winder | ||
| Type | Turret Tumbling Tesion Controlled Winder, Film Xut-Off By Hot Wire at Pre-set Target Film Length And Reel-Change Automatically. | |
| Driving Motor (winding) | 2 Hp Ac With 1/20 Rreducer x 2 Sets | 3 Hp Ac With 1/20 Reducer x 2 Sets |
| Speed (M/min) | 0-60 M/min | 0-60 M/min |
| Edge Scrap Recycling Unit | ||
| Type & Operation Method | Spooled Winder Unit x 2 Sets Trimmed Scarp Being Compressed, Crushed And Into Extruder By 3 Hp Centrifugal Blower For Reclamation. | |
| Water Chiller | ||
| Power | 3.5 kw x 2 | 5 kw x 2 |
| Pipe Size | 1 1/2" | 1 1/2" |
| Btu | 119400 (10rt) | 176925 (15rt) |
| Control Pane | Lsolated Type With Complate Instrumentation And Wiring. | |
| Optional Items | 1 Hp Auto Loader,3 Hp Air Compressor | |
| MAchine Dimensions (L x W x H) (cm) | 600 x 635 x 330 (For Reference) | 850 x 900 x 330 (For Reference) |
»